3.5x3.5 Inch Personalized Square Labels - Permanent White Film Matte Lamination

Customize any magnet with the artwork. Either you can use your own artwork or seek the assistance of our graphic experts to come up with a good artwork.

If you prefer to design the artwork by yourself, please follow to the guidelines on the file size, quality and format mentioned below.

• Editable formats -Any editable file formats such as Al. .PSD, PDF, .EPS or similar formats.
• Resolution - All bitmaps and JPEG images should be supplied at a resolution of no less than 300 dpi
• Margins - A minimum of 1/8 of an inch margin from the cut edge of your magnet should be ensured in the design. Better not to have borders or designs along the edge of the magnet.
• Color mode - CMYK is the preferred color mode for printing
• Conversions - Convert all fonts to curves/outlines

Layout:

• Die Line should be a stroke with ink named Die Line and set to Overprint.
• Standard corner radius of Rounded Corner Rectangles (RCR) are 0.125 (1/8")
• Butt cut labels cannot bleed. Must have 1/16" white border.
• Artboard should be same size of the label size. Bleed extends past artboard.
• Bleed - must extend 1/16" past the Die Line
• Imprint margin - 1/16" inside the Die Line.

The production begins only after the customer approves the art design proof. During the creation of art design proof, you are free to ask for revisions till you are completely satisfied.